13 Trailer Towings found
-
VEHICLE SPECIFIC
Genuine Ford Trailer Hitch
Part Number: 7T4Z-19D520-A
- Original equipment hitch bolts directly into existing holes no drilling or welding required.
- Rear fascia must be trimmed for installation.
- NOTE: Towing capacity could be limited by vehicle powertrain.
- See your dealer or Owners Guide for details.
-
VEHICLE SPECIFIC
Genuine Ford Trailer Hitch
Part Number: BT4Z-19D520-A
- Not for use with Edge Sport.
- Original equipment hitch bolts directly into existing holes – no drilling or welding required.
- Rear fascia must be trimmed for installation.
- NOTE: Towing capacity could be limited by vehicle powertrain.
- See your dealer or Owners Guide for details.
-
VEHICLE SPECIFIC
- Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner’s Manual for details.
- This light-duty hitch ball is for towing applications up to 2,000 lbs.
- 1-7/8” ball, 1” shank diameter, 2-1/8” shank length
- Features forged stainless-steel one-piece construction for maximum strength and corrosion resistance
- 2,000 lb. capacity
Product Specifications
1 7/8 Ball, 1 Inch Shank -
VEHICLE SPECIFIC
- Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner’s Manual for details.
- This ball mount fits 2” square receivers and is rated for up to 6,000 lb. GTW/600 lb. TW.
- Solid 2” shank, 9” length with 2-1/4” rise, 4” drop
- 1” diameter ball hole6,000 lb. capacity
- Corrosion-resistant black powdercoat finish
Product Specifications
2 1/4 Inch Rise x 4 Inch Drop x 1 Inch Dia. Hole -
VEHICLE SPECIFIC
- Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner’s Manual for details.
- This ball mount fits 2” square receivers and is rated for up to 6,000 lb. GTW/600 lb. TW.
- Solid 2” shank, 8-1/2” length with 3/4” rise, 2” drop
- 1” diameter ball hole
- 6,000 lb. capacity
- Corrosion-resistant black powdercoat finish
Product Specifications
2 Inch Drop -
VEHICLE SPECIFIC
Genuine Ford Trailer Hitch Wiring Harness
Part Number: DT4Z-15A416-A
- The 4-pin wiring harness assembly is made to plug into the factory electrical system.
- The 4-pin design does not allow the use of trailers with electric brakes.
- Dealer installation recommended.
Replaced by: FT1Z-15A416-A -
VEHICLE SPECIFIC
Genuine Ford Trailer Hitch;2 Inch Ball
Part Number: BL3Z-19F503-B
- Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner’s Manual for details.
- This heavy-duty hitch ball is for towing applications up to 6,000 lbs.
- 2” ball, 1” shank diameter, 2-1/8” shank length
- Features forged stainless-steel one-piece construction for maximum strength and corrosion resistance
- 6,000 lb. capacity
Product Specifications
2 Inch Ball -
VEHICLE SPECIFIC
Discontinued
- Chrome trailer hitch balls available in 1 7/8" (4.8 cm).
- Hitch balls feature forged, one-piece construction for maximum strength and a chrome finish for corrosion resistance.
- Designed with wrench flats to aidinstallation and removal.
- Refer to your Owner's Guide for towing limitations.
-
VEHICLE SPECIFIC
Discontinued
- This rugged drawbar is designed to be used with 1 ¼" trailer hitch receivers. Place it in the 4" "rise" position to match trailer coupler height.
- Solid steel shank
- Heavy steel ball platform
- Durable zinc-coated finish
- See your dealer or Owners Guide for towing limitations
Replaced by: BL8Z-19A282-A -
VEHICLE SPECIFIC
Discontinued
- Not For Use With Edge Sport or Hands Free Tailgate.
- Original equipment hitch bolts directly into existing holes – no drilling or welding required.
- Rear fascia must be trimmed for installation.
- NOTE: Towing capacity could be limited by vehicle powertrain.
- See your dealer or Owners Guide for details.
Product Specifications
For 2 Inch Receiver
