17 Trailer Towings found
-
VEHICLE SPECIFIC
Genuine Ford Trailer Hitch
Part Number: GB5Z-19D520-A
- For use with unique rear fascia from Ford Accessories.
- Trailer hitch drawbar, ball and wiring harness sold separately.
- Towing capacity is dependent on vehicle powertrain
- Module required if vehicle is equipped with Hands-Free Foot Activate Liftgate.(1
- Take your adventure quotient to the next level: Equip your Explorer with this rugged receiver that bolts directly to the rear frame and provides the capability to tow a boat, camper or trailer.
- Constructed of tubular steel crossmembers and high-strength steel brackets.
- Finished with a durable E-coat and black powder topcoat for maximum corrosion resistance.
- Dimensions – approximately 17.5" long, 51.1" wide, 10.0" high.
- Includes hitch, plus mounting hardware.
- Dealer installation recommended.
Replaced by: GB5Z-19D520-C -
VEHICLE SPECIFIC
Genuine Ford Trailer Hitch
Part Number: JB5Z-19D520-AA
- Module Replacement Required if vehicle is equipped with Hands-Free Foot Activated Liftgate.
- Take your adventure quotient to the next level: Equip your Explorer with this rugged receiver that bolts directly to the rear frame and provides the capability to tow a boat, camper or trailer.
- Constructed of tubular steel crossmembers and high-strength steel brackets.
- Finished with a durable E-coat and black powder topcoat for maximum corrosion resistance.
- Dimensions – approximately 17.5" long, 51.1" wide, 10.0" high.
- Includes hitch, bezel and mounting hardware.
- Dealer installation recommended.
-
VEHICLE SPECIFIC
Genuine Ford Trailer Hitch - Class I
Part Number: BB5Z-19D520-AA
- Original equipment hitch bolts directly into existing holes – no drilling or welding required.
- NOTE: Towing capacity could be limited by vehicle powertrain.
- See your dealer or Owners Guide for details.
-
VEHICLE SPECIFIC
Genuine Ford Trailer Hitch ,2 Inch Ball
Part Number: BL3Z-19F503-B
- Available 2 inch (5 cm) diameters, hitch balls feature forged, one-piece construction for maximum strength and a chrome finish for corrosion resistance.
- See your dealer for towing limitations.
- Available for vehicles equipped with a trailer hitch.
- 2" ball 1" shank diameter 2 1/8" long
Product Specifications
2 Inch Ball -
VEHICLE SPECIFIC
- Not For Use With Hybrid.
- 2 Inch X 4 Inch Drop Ball Mount
- 2 1/4 Inch Rise x 4 Inch Drop x 1 1/4 Inch Dia. hole
- For 2 Inch Receivers
Product Specifications
2 1/4 Inch Rise x 4 Inch Drop x 1 Inch Dia. Hole -
VEHICLE SPECIFIC
- Not For Use WIth Hybrid.
- 2 Inch x 2 3/16 Inch Drop Ball Mount
- 3/4 Inch Rise x 2 Inch Drop x 1 Inch Dia. Hole
Product Specifications
2 Inch Drop -
VEHICLE SPECIFIC
- This 4-pin wiring harness assembly is made to plug into the factory electrical system.
- The 4-pin design does not allow the use of trailers with electric brakes.
- Dealer installation recommended.
Product Specifications
4 Pin Connector -
VEHICLE SPECIFIC
Discontinued
- Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that is expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
- For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
- Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
- Finished with a durable Sterling Silver clearcoat.
- Includes lower fascia, hitch cover, installation sheet and mounting hardware.
- Dealer installation recommended.
-
VEHICLE SPECIFIC
Discontinued
- For vehicles without Class II or Class III Trailer Tow Packages.
- Recommended when installing a Ford accessory trailer hitch.
- Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that's expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
- For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
- Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
- Finished with a durable Silver Lining clearcoat.
- Includes lower fascia, hitch cover, installation sheet and mounting hardware.
- Dealer installation recommended.
-
VEHICLE SPECIFIC
Discontinued
- Recommended when installing a Ford accessory trailer hitch.
- For vehicles without Class II or Class III Trailer Tow Packages. .
- Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that's expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
- For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
- Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
- Finished with a durable Carbon Black clearcoat.
- Includes fascia, plus mounting hardware.
- Dealer installation recommended.
