Power Steering Pump Installation for 1996 Ford E-250 Econoline 5.8L V8 4AT E4OD 5.8L V8 4-Speed Automatic Transmission E4OD
Change VehiclePart No.
Part Description
Retail
Price
Price
Your
Price
Price
Qty.
Bracket - AlternatorMounting bracket,side, See Note: 2- Fit Note:8 Cyl 5.8L
- Callout Name:10A313
- Replaced By:F6TZ-10A313-CA
1- Fit Note:
- Bracket Assy - Power Steering Pump7.3L eng.
- Base Number:3A732
- Callout Name:3A732
- Base Number:
- CLAMP (HOSE)
Bolt - Hexagon Head- Callout Name:N605803-S2
- Replaced By:-N605803-S100
5- Callout Name:
Bolt-M8X1.25X123.0 Hexagon Flange Pi- Base Number:N806020-S2
- Callout Name:N806020-S2
1- Base Number:
- HOSE (FUEL TANK TO FILLER PIPE)
Approx. 10" long - use with midship fuel tank, diesel- Callout Name:9047
- Replaced By:F7UZ-9047-BE
1 - Callout Name:
Also serviced in 9047. Cadbar II hose material with bonded 9A064 clamp. Also includes 1 loose 9A064 clamp for attaching to 9034 steel pipe, gas unleaded/leaded fuel, midship fuel tank- Base Number:9047
- Callout Name:9047
1- Base Number:
Use with aft axle fuel tank, exc. Cutaway- Base Number:9047
- Callout Name:9047
- Base Number:
Hose Assy - Pump To Steering GearPump to gear(pressure)- Fit Note:8 Cyl 5.0L, 8 Cyl 5.8L
- Base Number:3A719
- Callout Name:3A719
- Fit Note:
- POWER STEERING PUMP APPLICATION CHART
Parts List No. 1 #HBA-HA, -gas -exc. stripped chassis (Saginaw) - has a cap on top- Base Number:3A674
- Base Number:
- Parts List No. 9 #HBC-KK / with resevoir, diesel - exc. stripped chassis (Ford), FROM 12/1/91
- Replaced By:F2UZ-3A674-ABRM
1 - Replaced By:
- Parts List No. 8, stripped chassis or RV cutaway (Saginaw) - has an inlet nipple on top
- Base Number:3A674
- Base Number:
Pulley - Power Steering#F5TE 3D673-AA (8 Ribbed), Diesel eng.- Base Number:3A733
- Callout Name:3A733
- Base Number:
- Pulley Assy - Tension#1L3J 6B217-AA , Without A/C
- Fit Note:8 Cyl 5.8L
- Base Number:6B217
- Callout Name:6B217
1 - Fit Note:
- PULLEY ASY. (BELT IDLER)
V-belt with bearing, Dealer installed A/C , ENG.SZ.: 8- Fit Note:8 Cyl 5.8L
- Callout Name:8678
- Fit Note:
- Used in E8TZ 6B209-A,B assemblies, w/60 amp. alternator , ENG.SZ.: 8
- Fit Note:8 Cyl 5.8L
- Callout Name:8678
- Replaced By:1L2Z-8678-AD
1 - Fit Note:
(8/94), FROM 2/14/92 , ENG.SZ.: 8- Fit Note:8 Cyl 5.8L
- Callout Name:8678
- Replaced By:F4TZ-8678-A
1- Fit Note:
Smooth plastic pulley, Factory A/C , ENG.SZ.: 8- Fit Note:8 Cyl 5.0L, 8 Cyl 5.8L
- Base Number:8678
- Callout Name:8678
1- Fit Note:
- Grooved pulley only; Used in place of AIR pump when vehicle was not equipped. For bracket, use F6TZ 8680-AB , ENG.SZ.: 8
- Fit Note:8 Cyl 5.8L
- Base Number:8678
- Callout Name:8678
- Fit Note:
- STEERING GEAR ASY. APPLICATION CHARTParts List No. 0 #SPA-GU, HB, HH, JX - assembly only - component parts are not serviced, w/FGAWR less than 4200 lbs.
- Base Number:3504
1 - Base Number:
Parts List No. 28 #SPA-HW,JU,BX,DX,HF,JY,GY,FW, 2-bolt housing cover- Base Number:3504
- Base Number:
- Parts List No. 26 #SPA-JW, w/FGAWR greater than 4200 lbs.
- Base Number:3504
- Base Number:
- SupportRear - w/o A/C , 7.3L
- Location:Rear
- Base Number:3C511
- Callout Name:3C511
- Location: