- My Account
- Help Center
- Cart
- Parts for:
- Ford
- Lincoln
- Mercury
- Accessories
Turbocharger, Piping & Related Parts for 1996 Ford E-350 Econoline 7.3L V8 Diesel Turbocharged 4AT E4OD 7.3L V8 Diesel Turbocharged 4-Speed Automatic Transmission E4OD
Change VehiclePart No.
Part Description
Retail
Price
Price
Your
Price
Price
Qty.
- BOLT (INJECTOR PUMP GEAR)
M10 Bolt; Retains Turbo to Turbo Y adaptor- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:4
- Package Quantity:1
- Base Number:1821641-C1
- Callout Name:9N517
- Fit Note:
Bolt-M10 x 35 mounts 9155 fuel/water separator, DI Turbo, BEFORE 1/5/98- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:2
- Package Quantity:2
- Base Number:9N517
- Callout Name:9N517
- Fit Note:
Bolt-M8 x 70mm hex flange..Attach high pressure oil inj pump(9A543). #1818726-C1.- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Callout Name:9N517
- Replaced By:3C3Z-9N517-AA
- Fit Note:
- Nut; Retains Turbo to Turbo Y adaptor
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:4
- Package Quantity:1
- Base Number:1821648-C1
- Callout Name:9N517
- Fit Note:
- BRACKET ASY. (TURBORCHARGER HEAT SHIELD)
- Heat shield mounting bracket
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:9G479
- Callout Name:9G479
- Fit Note:
- CLAMP (HOSE)
3 1/2" clamp. Air inlet hose to Turbo inlet 2 required. (1 per package), DI Turbo- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:2
- Package Quantity:1
- Base Number:8287
- Callout Name:8287
- Fit Note:
- 2 1/2" worm clamp; Attaches turbo air outlets from "Y" adaptor to cylinder head inlet., DI Turbo
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:4
- Package Quantity:4
- Base Number:8287
- Callout Name:8287
- Fit Note:
- Turbo outlet clamp
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:8287
- Callout Name:8287
- Fit Note:
- Mega-Torque Clamp 1 3/4"
- Base Number:8287
- Callout Name:8287
- Base Number:
- Hose - Air Inlet
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Callout Name:9C623
- Replaced By:F7UZ-9C681-AA
- Fit Note:
GasketFlange gasket between Turbo Outlet to Exhaust Inlet.- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:6N640
- Callout Name:6N640
- Fit Note:
Flange - Exhaust PipeRH & LH; Attaches exhaust pipe to turbo Y connector; 2 3/4" bolt pattern- Location:Passenger Side & Driver Side
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:2
- Package Quantity:1
- Base Number:6N632
- Callout Name:6N632
- Location:
GasketSeal-Turbo compressor outlet(mounts between 6K682 & 6K889), DI Turbo, BEFORE 12/7/98- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:9E436
- Callout Name:9E436
- Fit Note:
Bolt- Base Number:1817993-C1
- Callout Name:1817993-C1
- Base Number:
- Bolt
- Base Number:1821641-C1
- Callout Name:1821641-C1
- Base Number:
- Stud
- Base Number:1821642-C3
- Callout Name:1821642-C3
- Base Number:
- Nut
- Base Number:1821648-C1
- Callout Name:1821648-C1
- Base Number:
- Bolt
- Callout Name:1831334-C91
- Replaced By:2C3Z-9T514-AA
- Callout Name:
- HOSE (AIR CLEANER TO TURBO)
Orange turbo inlet hose, BEFORE 10-23-97- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Callout Name:9C681
- Replaced By:F7UZ-9C681-AA
- Fit Note:
Kit to replace orange turbo inlet asy., BEFORE 10-23-97- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:9C623
- Callout Name:9C681
- Fit Note:
- HOSE (FUEL TANK TO FILLER PIPE)
Approx. 10" long - use with midship fuel tank, diesel- Callout Name:9047
- Replaced By:F7UZ-9047-BE
- Callout Name:
Also serviced in 9047. Cadbar II hose material with bonded 9A064 clamp. Also includes 1 loose 9A064 clamp for attaching to 9034 steel pipe, gas unleaded/leaded fuel, midship fuel tank- Base Number:9047
- Callout Name:9047
- Base Number:
Use with aft axle fuel tank, exc. Cutaway- Base Number:9047
- Callout Name:9047
- Base Number:
- 20" long. Also serviced in 9B149 kits, Cutaway/Stripped Chassis, FROM 4/12/93
- Base Number:9047
- Callout Name:9047
- Base Number:
- O RING (OIL DRAIN)
Small- Mounts on top and below turbo pedestal 1 used on top 1 used on bottom of pedestal- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:2
- Package Quantity:2
- Base Number:6N653
- Callout Name:6N653
- Fit Note:
Large- Mounts on top and below turbo pedestal 1 used on top 1 used on bottom of pedestal- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:2
- Package Quantity:2
- Base Number:6N653
- Callout Name:6N653
- Fit Note:
- Repair kit- consists of 7 seals,2 bolts,1 clip and a ring.
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:6N653
- Callout Name:6N653
- Fit Note:
Kit - "O" RingUsed to repair turbo pedestal 6N639, 7.3L, BEFORE 1/12/1998- Callout Name:9P466
- Replaced By:2C3Z-9P466-BC
- Callout Name:
- ShieldNote: Mounting bracket is 9G479. mtg. Bolt(2) 1817956-C1., DI Turbo, BEFORE 12/7/98
- Base Number:9G478
- Callout Name:9G478
- Base Number:
Solenoid AssyEBP solenoid mounted on base of turbo w/ wire leads- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:6C673
- Callout Name:6C673
- Fit Note:
Tube Assy- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:6N696
- Callout Name:6N696
- Fit Note:
- BoltConsists of (8)turbo to pedestal bolts, (11)turbo housing attachment bolts, DI Turbo, BEFORE 1/12/98
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:9G486
- Callout Name:9G486
- Fit Note:
- TURBO (INTAKE HOSE)
Cyl. head inlet to turbo air Y adaptor.- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:2
- Package Quantity:1
- Callout Name:6C640
- Replaced By:F6TZ-6C640-A
- Fit Note:
- Cyl. head inlet to turbo air Y adaptor.
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:2
- Package Quantity:1
- Base Number:6C640
- Callout Name:6C640
- Fit Note:
- TURBO INLET PIPE
(4) Seal; RH & LH; Attaches exhaust pipe to turbo Y connector- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:2
- Package Quantity:1
- Base Number:6K854
- Callout Name:6K854
- Fit Note:
(6) Turbo Y connector, Rectangular 4 bolt connection- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:6K854
- Callout Name:6K854
- Fit Note:
- (2) RH & LH flange; (does not come with pipe)
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:2
- Package Quantity:1
- Base Number:6K854
- Callout Name:6K854
- Fit Note:
(5) RH Pipe; manifold to turbo Y connector- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:6K854
- Callout Name:6K854
- Fit Note:
- (3) LH exhaust pipe; manifold to turbo inlet Y adaptor
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:6K854
- Callout Name:6K854
- Fit Note:
Kit - Remanufactured Turbo PedestalWith EBP; (Cold Weather package) Motorcraft Reman version- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:6N639
- Callout Name:6N639
- Fit Note:
Kit - Remanufactured TurbochargerMotorcraft reman version- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:6K682
- Callout Name:6K682
- Fit Note:
