Internal Parts-Clutches, Gears, Shafts & Related Parts for 1996 Ford E-350 Econoline 7.3L V8 Diesel Turbocharged 4AT E4OD 7.3L V8 Diesel Turbocharged 4-Speed Automatic Transmission E4OD
Change VehiclePart No.
Part Description
Retail
Price
Price
Your
Price
Price
Qty.
Bearing Assy - Ball#9 Thrust Bearing
2 13/16" O.D. - located between 7D164 hub and 7D171 race
Located between 7A658 shaft and 7A130 support- Base Number:7G178
- Callout Name:7G178
1- Base Number:
Bearing Assy - NeedleLocated between 7A360 cyl. and 7A130 support- Base Number:7F374
- Callout Name:7F374
1- Base Number:
BearingLocated between 7B067 and 7A398 planet - Located between 7A398 and 7D063 sun gear- Base Number:7D234
- Callout Name:7D234
2- Base Number:
BearingLocated between 7B446 and 7A658- Callout Name:7F240
- Replaced By:3C3Z-7F240-AA
1- Callout Name:
BearingLocated between 7A103 and 7D063 (o/drv. sun gear)- Base Number:7C096
- Callout Name:7E486
1- Base Number:
- Washer - Thrust#6 tabs - (1) regd. for all forward planet Carrier assy. (2) reqd. for all 3 pinion gear reverse planet carrier assy.
- Callout Name:7A166
1 - Callout Name:
- BEARING ASY. /WASHER (PLANET CARRIER THRUST) 3 PINION PLANET THRUST WASHERS - 3 TABS
Washer - thrust - plain style - 3 tabs (15.0-15.5mm) - located between 7B067 and 7A398 - used with 3 pnion planetaries- Base Number:7A166
- Callout Name:7A166
2 - Base Number:
- Located on both sides of 7D006 - 3 tabs (15.0-15.5mm) - used with 3 pinion planetaries
- Require Quantity:2
- Package Quantity:2
- Base Number:7A166
- Callout Name:7A166
2 - Require Quantity:
- BEARING ASY. /WASHER (PLANET CARRIER THRUST) 4 PINION PLANET THRUST WASHERS - 4 TABS
Washer - thrust - plain style - located at between 7B067 and 7A398 - used with 4 pinion planetaries- Base Number:7A166
- Callout Name:7A166
- Base Number:
- Located on both sides of 7D006 planet - used with 4 pinion planetaries
- Require Quantity:2
- Package Quantity:1
- Base Number:7A166
- Callout Name:7A166
- Require Quantity:
Washer - Thrust3 51/64" OD - 2 13/16" ID - 4 tabs- Base Number:7C096
- Callout Name:7C096
- Base Number:
- BOLT (HYDRAULIC FEED)
Reqd. for center support- Require Quantity:2
- Package Quantity:5
- Base Number:7Z059
- Callout Name:7Z059
5- Require Quantity:
Screw5/16" - 24 x 2" hex head
Hex. head - 5/16" - 24 x 2"- Require Quantity:5
- Package Quantity:5
- Base Number:7D167
- Callout Name:7D167
5- Require Quantity:
- CASE ASY.
Screw & washer, hex. head - M12-1.75x110- Callout Name:7005
- Replaced By:-N808235-S439
4 - Callout Name:
(P-12) - plug (dry seal) - 1/8" - 27- Require Quantity:2
- Package Quantity:1
- Base Number:87650-S
- Callout Name:7005
- Require Quantity:
- CLUTCH ASY. (ONE-WAY)
Low one-way clutch, BEFORE 5/1/97
One piece - design over/run clutch - use w/F3TZ 7B067-A hub only - Note: 377135-5 not reqd. w/F3TZ 7A089-A cl. assy.- Base Number:7A089
- Callout Name:7A089
- Base Number:
Service replacement part - use with F7TZ 7B067-AC (Grob style) and F7TZ 7D171-AA- Base Number:7A089
- Callout Name:7A089
1- Base Number:
- Clutch Assy
- Base Number:7A089
- Callout Name:7A089
1 - Base Number:
Clutch AssyKit - includes inner race, outer race, clutch assembly and s/ring , 5.4L, FROM 11/25/97
Kit - includes inner race, outer race, clutch assembly and s/ring , 5.4L,5.8L,6.8L,7.3L,7.5L, BEFORE 11/25/97- Base Number:7A089
- Callout Name:7A089
1- Base Number:
Cylinder - Forward Clutch8 plate clutch cyl. - See Note 1
Incl. (1) D9AZ 7B070-A spring - 8 plate clutch cyl. - See Note 1- Callout Name:7A360
- Callout Name:
CylinderCast iron cylinder- Base Number:7G387
- Callout Name:7G387
- Base Number:
- Cylinder#F6TP 7G384-AA
- Base Number:7G384
- Callout Name:7G384
- Base Number:
- DRUM ASY. (INTERM. BRAKE)
Retainer(QQ-94-A) - ring (retain gear in hub) 4 21/32" dia.- Base Number:377132-S
- Callout Name:7D392
4- Base Number:
Gear1/2" hub thickness - one groove on hub surface - 4 19/32 O.D. - 14 - 36 teeth - incl. (1) D3TZ 7B368-A washer- Callout Name:7A233
- Callout Name:
- GEAR (RING)
- Gear - outputshaft ring - 1 11/16" wide - 74 internal teeth,
- Base Number:7A153
- Callout Name:7A153
1 - Base Number:
- Gear kit - overdrive ring - includes 1- F6TP-7653-AA ring gear, 1- F5TP-7G375-AA retaining ring and 1- F6TP-7G375-AB retaining ring , Use with cast overdrive cylinder only
- Base Number:7A153
- Callout Name:7A153
1 - Base Number:
- Kit - overdrive ring gear - includes (1) F5TZ 7G375-AA and (1) F6TZ 7G375-AA snap ring - Used with stamped steel Overdrive clutch drum 7G387, Use with stamped steel overdrive cylinder only,
- Base Number:7A153
- Callout Name:7A153
1 - Base Number:
- GEAR ASY. (SUN - FWD/REVERSE AND OVERDRIVE) FORWARD/REVERSE SUN GEAR
- Gear Assembly - Sun1 47/64" long - 38 teeth, Use with cast iron overdrive cylinder only, BEFORE 7/15/97
- Callout Name:7D063
- Replaced By:F81Z-7D063-AA
1 - Callout Name:
Hub - ClutchService replacement part - grob style hub, must be used with F7TZ 7A089-AA, F7TZ 7D171-AA, F81Z 7B164-DA, and F6TZ 7D006-BA only- Base Number:7B067
- Callout Name:7B067
1- Base Number:
- HUB (OUTPUT SHAFT)
Hub only - used with E9TZ 7D171-AA and E6DZ 7G178-A- Callout Name:7D164
- Replaced By:F81Z-7D164-AA
1 - Callout Name:
(QQ-16-EA) ring 7D164 to 7060 retaining 1 1/2" dia.- Base Number:387031-S5
- Callout Name:7D164
- Base Number:
- HUB (RING GEAR) FORWARD RINGHub only - used with needle bearing thrust bearing (7H334)
- Callout Name:7B067
- Replaced By:F7TZ-7B067-AB
1 - Callout Name:
Piston - Intermediate Clutch- Base Number:7E005
- Callout Name:7E005
- Base Number:
- PISTON AND ROD ASY. (INTERM. BAND SERVO)Includes seal bonded to piston, BEFORE 8/7/95
- Callout Name:7D021
- Replaced By:F6TZ-7D021-A
- Callout Name:
New push in design - retaining ring & cover not required - see TSB 95-23-14, FROM 8/7/95- Base Number:7D021
- Callout Name:7D021
- Base Number:
- PISTON ASY. (CLUTCH)
#D6AP 7A258-AA or AB
Use in forward clutch - D6AP 7A258-AA, AB- Base Number:7A262
- Callout Name:7A262
1- Base Number:
Piston#F6TP 7G418-AA- stamped piston with molded lip seals- Base Number:7A262
- Callout Name:7A262
- Base Number:
- PISTON ASY. (REVERSE CLUTCH)
Planet Assy - ForwardPlanetary - 4 pinion - used with (7H334) thrust bearing - if replacing E9TZ 7A398-A planetary kit F7TZ 7B067-AA must also be used - See TSB 96-24-18- Callout Name:7A398
- Callout Name:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) COAST CLUTCH
External steel- Require Quantity:2
- Package Quantity:1
- Callout Name:7B164
1 - Require Quantity:
- Driven Plate - SteelExternal - steel
- Base Number:7B442
- Callout Name:7B164
4 - Base Number:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) DIRECT CLUTCHExternal steel
- Require Quantity:4
- Package Quantity:4
- Base Number:7B442
- Callout Name:7B164
4 - Require Quantity:
- Internal friction
- Require Quantity:5
- Package Quantity:5
- Base Number:7B164
- Callout Name:7B164
- Require Quantity:
- Plate Assy - DriveInternal friction
- Require Quantity:4
- Package Quantity:4
- Base Number:7B164
- Callout Name:7B164
4 - Require Quantity:
- Plate Assy - DriveInternal - friction
- Base Number:7B164
- Callout Name:7B164
4 - Base Number:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) INTERMEDIATE CLUTCH
Plate - steel - .078" , All except tag#'s beginning with F8- Require Quantity:2
- Package Quantity:1
- Callout Name:7B164
- Require Quantity:
- Plate -friction
- Require Quantity:3
- Package Quantity:1
- Callout Name:7B164
- Require Quantity:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) OVERDRIVE CLUTCHExternal steel
- Require Quantity:2
- Package Quantity:2
- Base Number:7B442
- Callout Name:7B164
- Require Quantity:
- Internal friction
- Require Quantity:2
- Package Quantity:1
- Callout Name:7B164
- Require Quantity:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) REVERSE CLUTCHExternal - steel
External steel- Base Number:7B442
- Callout Name:7B164
6 - Base Number:
- Internal - friction - cream color lining
Internal friction, BEFORE 5/1/97- Callout Name:7B164
- Callout Name:
Plate - friction - Service replacement part - use when F7TZ 7B067-AC (Grob style) hub is used.- Base Number:7B164
- Callout Name:7B164
6- Base Number:
- PLATE (CLUTCH PRESSURE)
Forward clutch front - triangle depression on face of plate- Base Number:7B066A
- Callout Name:7B066
1 - Base Number:
- 11/32" thick - 5 1/8" I.D. - 26 teeth, 4.9L,5.4L,5.8L,6.8L,7.5L
Direct drive clutch, forward clutch rear- Base Number:7B066
- Callout Name:7B066
1 - Base Number:
- (QQ-98-B) - 7" O.D. - .094" thick, retaining ring - 7B066 to cyl.
- Base Number:377444-S
- Callout Name:7B066
1 - Base Number:
Spacer1/4" thk. - 5 27/32" I.D. - 60 teeth- Callout Name:7B066
- Callout Name:
- PLATE (CLUTCH PRESSURE) DIRECT CLUTCH0.341" thick - 5 1/8" I.D. - 26 teeth, 7.3L
- Callout Name:7B066
- Callout Name:
- (QQ-98B) 7" O.D. - .094" thick, retaining ring 7B066 to 7A360
(QQ-98B) 7" O.D. - .094" thick, retaining ring 7B066 to 7D044- Base Number:377444-S
- Callout Name:7B066
1 - Base Number:
- PLATE (CLUTCH PRESSURE) FORWARD CLUTCHFront - 19/64" thick - 5 1/8" I.d. - 26 teeth
- Location:Front
- Base Number:7B066A
- Callout Name:7B066
1 - Location:
- Rear - 11/32" thick - 5 1/8" I.D. - 26 teeth
- Location:Rear
- Base Number:7B066
- Callout Name:7B066
1 - Location:
- PLATE (CLUTCH PRESSURE) INTERMEDIATE CLUTCHApply side - 3.13-3.23mm Thick - 157.2-157.8mm I.D. - 26 teeth in a 30 tooth profile
- Base Number:7B066A
- Callout Name:7B066
- Base Number:
- Rear plate - 8.15-8.41mm thick - 158.2-158.8mm I.D. - 30 teeth no groove on O.D. of teeth, 5.8L,7.3L,7.5L
- Callout Name:7B066
- Callout Name:
- Rear plate - 37/64" thick - 6 1/4" I.D. - 30 teeth no groove on O.D. of teeth, 4.9L
- Callout Name:7B066
1 - Callout Name:
- Drive Plate - Clutch.550" thick
- Callout Name:7B066
- Callout Name:
- PUMP ASY. (FRONT FLUID)
(AB-91-E) bolt (7A103 to 7005) M8 x 1.25 x 65 hex head (metric)- Require Quantity:9
- Package Quantity:4
- Base Number:HS1
- Callout Name:7A103
4 - Require Quantity:
- RACE (OVERRUNNING CLUTCH INNER)BEFORE 5/1/97
Race - used with E6DZ 7G178-A #9 thrust washer- Base Number:7D171
- Callout Name:7D171
1 - Base Number:
Service replacement part - Grob style - used with F7TZ 7A089-AA,- Base Number:7D171
- Callout Name:7D171
1- Base Number:
- RETAINER (CLUTCH DISC SPRING)
- RING (CENTER SHAFT RETAINING)Retaining ring - flat - 141mm x 2.8mm x 1.52mm thick - retains o/drv. one-way clutch 7A089 to 7A153
- Base Number:7G375
- Callout Name:7G375
1 - Base Number:
- Retaining ring - wavy- 137mm x 2.8mm x 1.52mm thick - 7A658 to 7A153
- Base Number:7G375
- Callout Name:7G375
- Base Number:
- Ring6 3/32" large I.D.
- Base Number:7N519
- Callout Name:7N519
1 - Base Number:
- SEAL (CLUTCH PISTON FLUID) COAST CLUTCH
- SEAL (CLUTCH PISTON FLUID) DIRECT CLUTCH
- SealOuter (large) 7 3/4" O.D. flair lip seal refer to group 7F225 for inner seal
- Callout Name:7A548
- Callout Name:
SealLocated on front pump support - 2 3/8" O.D. - 1/16" thick- Require Quantity:2
- Package Quantity:2
- Base Number:7G402
- Callout Name:7G402
2- Require Quantity:
Seal
Located on center support- Require Quantity:2
- Package Quantity:1
- Base Number:7D025
- Callout Name:7D025
- Require Quantity:
SealIntermediate clutch piston - Overdrive clutch piston - flair lip seal - 6 31/64" OD x 6.00" ID- Base Number:7F225
- Callout Name:7F225
- Base Number:
SealOuter - flair lip seal - 8 13/32" OD x 7 29/32" ID- Base Number:7F224
- Callout Name:7F224
- Base Number:
- SEAL (REVERSE CLUTCH PISTON - INNER)
- SEAL ASY. (FRONT FLUID PUMP)
Small - 2" I.D. x 2 3/4" O.D.- Callout Name:7A248
- Replaced By:F2VY-7A248-A
1- Callout Name:
- SHAFT ASY. (OUTPUT)Copper flash plate (QQ-16-EA) ring - 5/64" thick - 1 11/32" I.D. - (retains 7D164 to 7060)
- Base Number:387031-S5
- Callout Name:7060
- Base Number:
- #3 grooves - 20.00" long - 7 tooth speedo - cup plug in end of shaft, 4x2
- Callout Name:7060
- Callout Name:
- #No grooves - 20.00" long - 8 tooth speedo - cup plug in end of shaft, 4x2
- Callout Name:7060
- Callout Name:
23 3/16" long - 25 - 34 - 36 teeth - 31 splines - 8 tooth speedo. gear rolled on shaft , 2/W/D- Callout Name:7060
- Callout Name:
- #No grooves - 20" long - no speedo gear - cup plug in end of shaft, 4x2
- Callout Name:7060
- Replaced By:F81Z-7060-AA
- Callout Name:
- Shaft AssemblyUse w/F4TZ 7B446-A carrier
- Callout Name:7A658
- Replaced By:9C3Z-7G387-E
1 - Callout Name:
- SNAP RING (CLUTCH PRESSURE PLATE RETAINING) - SELECTIVE FIT COAST CLUTCH
- SNAP RING (CLUTCH PRESSURE PLATE RETAINING) - SELECTIVE FIT OVERDRIVE CLUTCH
RingRetain 7F235 to 7D044- Base Number:7C122
- Callout Name:7C122
3- Base Number:
Spring5" O.D.- Base Number:7B070
- Callout Name:7B070
- Base Number:
- SPRING (CLUTCH PISTON DISC) FORWARD CLUTCH
- Spring
- Base Number:7B070
- Callout Name:7B070
1 - Base Number:
- Spring
- Base Number:7B070
- Callout Name:7B070
1 - Base Number:
- SPRING (CLUTCH PRESSURE)
Forward clutch - 4 teeth in a 26 tooth bank- Base Number:7E085
- Callout Name:7E085
1 - Base Number:
Spring#Pink , 5.0, 7.5L
#Pink , BEFORE 8/7/95- Callout Name:7D028
- Callout Name:
- STEERING GEAR ASY. APPLICATION CHARTParts List No. 0 #SPA-GU, HB, HH, JX - assembly only - component parts are not serviced, w/FGAWR less than 4200 lbs.
- Base Number:3504
1 - Base Number:
Parts List No. 28 #SPA-HW,JU,BX,DX,HF,JY,GY,FW, 2-bolt housing cover- Base Number:3504
- Base Number:
- Parts List No. 26 #SPA-JW,HG, w/FGAWR greater than 4200 lbs.
- Base Number:3504
- Base Number:
BracketSupport - center - bearing-style - must be used with F4TZ 7017-D input shaft and F4TZ 7B446-A overdrive planetary only.- Base Number:7A130
- Callout Name:7A130
- Base Number:
Washer - Thrust#F1TP 7L326-AA STMP - color black - replaces washer w/#1 stamp- Base Number:7L326
- Callout Name:7L326
- Base Number:
Washer - Thrust#8c Thrust
2 3/16" I.D. x 2 7/8" O.D.- Base Number:7D090
- Callout Name:7D090
2- Base Number:
Washer- Require Quantity:9
- Package Quantity:9
- Base Number:7G379
- Callout Name:7G379
9- Require Quantity:
- WASHER (FRONT PUMP SUPPORT THRUST)
Washer - Thrust3 3/4" dia - 3/64" thick
3 3/4" dia. x 3/64" thick- Base Number:7D066
- Callout Name:7D066
3- Base Number:
Washer - ThrustLocated between 7D044 and 7A089 - 4 13/16" I.D. 3 tabs- Base Number:7G401
- Callout Name:7G401
1- Base Number:
Washer - Output Shaft Flange
1 3/4" I.D.- Callout Name:7B368
1- Callout Name:
- WASHER (OVERDRIVE OVERRUNNING CLUTCH)
Located between 7A089 and 7B446 planet 4 5/8" O.D. - 2 tabs- Base Number:7L339
- Callout Name:7L339
- Base Number:
- #3 thrust washer - Use only when planetary 1C3Z 7B446-AA is used.
- Base Number:7L339
- Callout Name:7L339
- Base Number:
