Internal Parts-Case, Converter Assembly Extension & Related Parts for 1997 Ford E-250 Econoline 4.2L V6 4AT 4R70W 4.2L V6 4-Speed Automatic Transmission 4R70W
Change VehiclePart No.
Part Description
Retail
Price
Price
Your
Price
Price
Qty.
- CASE ASY.
Screw & washer, hex. head - M12-1.75x110- Callout Name:7005
- Replaced By:-N808235-S439
4 - Callout Name:
See TSB 96-7-14, 4.6L, may also require 3L3Z-7H398-AA plug and W700005-S309 retainer- Base Number:7005
- Callout Name:7005
- Base Number:
See TSB 96-7-14, 4.2L - under 8500 GVW- Base Number:7005
- Callout Name:7005
- Base Number:
(P-12) plue (reqd. to plug front pump, direct cl., forward & throttle valve-pressure holes in case-dry seal - 1/8"-27- Base Number:87650-S
- Callout Name:7005
- Base Number:
Connector - Oil Tube5/16"
5/16" -Used without cooler bypass tube - see 7G118 & 7Z152 if equipted with cooler bypass tube.- Require Quantity:2
- Package Quantity:1
- Callout Name:7D273
- Replaced By:7L3Z-7D273-A
1- Require Quantity:
Connector - Oil TubeIncludes "O" ring, 1/2 - 20 female x 1/4 NPTF male, for 5/16 diameter tube- Require Quantity:2
- Package Quantity:2
- Base Number:7D273
- Callout Name:7D273
- Require Quantity:
- CONVERTER ASY.
#75A, 4.2L
#75A, 4.6L- Callout Name:7902
- Replaced By:F8AZ-7902-AARM
1 - Callout Name:
- (P-12) plug - dry seal tapered thread - 1/8" - 27
- Base Number:87650-S
- Callout Name:7902
- Base Number:
- COVER (TRANSMISSION CONVERTER HOUSING LOWER)
Plug - rubber - located in front of 7007 plate - 84mm x 100mm - with hold down clip, 4.2L/4R70W- Fit Note:6 Cyl 2.4L Diesel Turbocharged, 6 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 2.9L, 6 Cyl 3.0L, 6 Cyl 3.0L DOHC EFI Modular, 6 Cyl 3.2L, 6 Cyl 3.3L, 6 Cyl 3.8L, 6 Cyl 3.8L Supercharged, 6 Cyl 4.0L, 6 Cyl 4.2L, 6 Cyl 4.9L
- Callout Name:7986
- Replaced By:6L3Z-7986-AA
1- Fit Note:
- GASKET (EXTENSION HOUSING)
Steel core with silicone bead, 4.2 and 4.6L- Base Number:7086
- Callout Name:7086
1- Base Number:
GasketGasket not included in kits - gasket is molded design and is reusable - refer to shop manual for cleaning procedure- Base Number:7A191
- Callout Name:7A191
- Base Number:
- HOUSING (EXTENSION)
(AB-111-EA) bolt (7A039 to 7005) top locations M10 x 1.5 x 40mm (metric)- Require Quantity:7
- Package Quantity:5
- Base Number:HB1
- Callout Name:7A039
5 - Require Quantity:
- (AB-118-EJ)-BOLT (HSG.TO CASE) HEX FLANGE HEAD-M8-1.25 X 30 (METRIC)
- Require Quantity:6
- Package Quantity:1
- Base Number:N605788-S2
- Callout Name:7A039
- Require Quantity:
10" long, Use F2UZ-7H183-A plug if required for sensor hole- Base Number:7A039
- Callout Name:7A039
1- Base Number:
11" Long. When servicing 2004 also order F2UZ-7H183-A plug and 57621-S2 screw to cover VSS hole.- Base Number:7A039
- Callout Name:7A039
1- Base Number:
With VSS hole, without lube tube - See TSB 97-23-13, FROM 7/21/97- Base Number:7A039
- Callout Name:7A039
- Base Number:
- PAN ASY. (FLUID)
Pan - shallow - used with molded gasket and 15mm long bolts- Base Number:7A194
- Callout Name:7A194
1 - Base Number:
Kit - drain plug in pan - includes reusable gasket, filter, 20 bolts, and I.S., All DSO applications only- Callout Name:7A194
- Replaced By:F81Z-7A194-BA
1- Callout Name:
- Pan - includes drain plug (7D479) and drain plug gasket (7F033), 5.4L - DSO
- Base Number:7A194
- Callout Name:7A194
- Base Number:
- Pan Assy - Transmission Oil
- Callout Name:7A194
- Replaced By:6L3Z-7A194-A
1 - Callout Name:
- PLUG
- Plug - to block OSS/TSS hole in late E4OD service cases
- Require Quantity:2
- Package Quantity:2
- Base Number:7H183
- Callout Name:7H183
2 - Require Quantity:
PlugPlug - rubber - located in bottom of transmission converter housing- Base Number:7N171
- Callout Name:7N171
1- Base Number:
SealRequired For EPC Solenoid- Require Quantity:2
- Package Quantity:10
- Base Number:7Z101
- Callout Name:7Z101
- Require Quantity:
- SEAL ASY. (EXTENSION HOUSING FLUID)
Sensor - Output Shaft Speed#F4AP 7H103-AA- Base Number:7H103
- Callout Name:7H103
- Base Number:
Valve Assy - VentService replacement part- Base Number:7034
- Callout Name:7034
1- Base Number:
