Contact UsLive Chator1-888-958-4872
- My Account
- Help Center
- Cart
- Parts for:
- Ford
- Lincoln
- Mercury
- Accessories
Wiring System-Engine of Fuel & Emission for 1997 Ford E-350 Econoline 7.3L V8 Diesel Turbocharged 4AT 4R70W 7.3L V8 Diesel Turbocharged 4-Speed Automatic Transmission 4R70W
Change VehiclePart No.
Part Description
Retail
Price
Price
Your
Price
Price
Qty.
- BracketBracket asy.-Exhaust Back Pressure (EBP) & engine cover front. #1824481-C1. , DI Turbo, BEFORE 1/12/98
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:9J432
- Callout Name:9J432
- Fit Note:
Connector-5/16 tube flared. Connects to 9D477 tube exhaust back pressure sensor. #1822713-C1- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Callout Name:9F485
- Replaced By:3C3Z-9F485-BA
- Fit Note:
- CONTROL ASY. (FUEL/WATER SEPARATOR)Water sensor switch, 7.3L DI Turbo, BEFORE 1/12/98
- Base Number:9S281
- Callout Name:9S281
- Base Number:
- Water in fuel sensor; threaded into side of filter housing., 7.3L DI Turbo, BEFORE 1/12/98
- Base Number:9S281
- Callout Name:9S281
- Base Number:
- Cover - RelayW/ Calif Ems.
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Callout Name:12A345
- Fit Note:
- Gasket
BEFORE 1-12-1998- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:2
- Package Quantity:1
- Base Number:6584
- Callout Name:6584
- Fit Note:
- HARNESS ASY. (FUEL FILTER/WATER SEPARATOR)Seal, DI Turbo
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:2
- Package Quantity:1
- Base Number:1807263-C1
- Callout Name:9S277
- Fit Note:
- Seal-fuel heater connector, DI Turbo
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:1807278-C1
- Callout Name:9S277
- Fit Note:
- #1825754-C91; Also serviced in "9155" asy. (Note: Lt. blue rectangular ribbed seal to fuel heater connector is 1807278-C1.)
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:9S277
- Callout Name:9S277
- Fit Note:
- MODULE (GLOW PLUG CONTROL)Junction block mounting bracket (2 bolt), w/Calif. Ems.
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Callout Name:12B533
- Replaced By:F81Z-14448-AB
- Fit Note:
- Solenoid type Glow Plug Relay only
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:12B533
- Callout Name:12B533
- Fit Note:
- Shunt (Resistor) located on top of relay, W/ Calif. Ems.
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:12B533
- Callout Name:12B533
- Fit Note:
- Seal for relay
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:1807279-C1
- Callout Name:12B533
- Fit Note:
- BOLT M10 X 20 HEX FLGEBolt-M10 x 20 hex flange. Used to mount "14A163" clamp., 7.3L DI Turbo
- Base Number:9232
- Callout Name:9232
- Base Number:
- "O" RingCAMP sensor o-ring; #1818384-C1
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Callout Name:12B615
- Fit Note:
- O RingIncluded with water sensor probe (9S281) and oil pressure switch (F6TZ-9278-AA)., 7.3L DI Turbo
- Callout Name:9C064
- Replaced By:3C3Z-9C064-CA
- Callout Name:
- Glow Plug
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Require Quantity:8
- Package Quantity:1
- Callout Name:12A342
- Replaced By:F4TZ-12A342-BA
- Fit Note:
- RETAINER (WIRE HARNESS)Trough at firewall holds 12A581
- Base Number:14A163E
- Callout Name:14A163
- Base Number:
- To retain coolant over flow hose at cowl
- Callout Name:14A163
- Callout Name:
- Attach 12A581 to frame
Attach 14405 to LH fender apron- Base Number:14A163A
- Callout Name:14A163
- Base Number:
- retains heater/ac blower motor
Retains throttle air by-pass valve to engine- Callout Name:14A163
- Callout Name:
- Retainer - push pin type - 20mm serrated pin with 60mm x 10mm wing - general use for wiring to sheet metal or blind hole retention. Use electrical tape to secure to harness. 10 per package., Service Repair Only
- Base Number:14A163B
- Callout Name:14A163
- Base Number:
- SENDER (WATER TEMPERATURE INDICATOR ENGINE UNIT)Sender; "Black" 2 spade-terminal connector; #F65F 10884-AA., 5.4L
Sender; "Black" 2 spade-terminal connector; #F65F 10884-AA., 6.8L
Sender; "Black" 2 spade-terminal connector; #F65F 10884-AA., 7.3L DI Turbo, BEFORE 13-JAN-2004- Base Number:10884
- Callout Name:10884
- Base Number:
- Engine coolant temperature switch. Screws into LH front of engine., 7.3L DI Turbo diesel, BEFORE 1/12/98
- Base Number:10884
- Callout Name:10884
- Base Number:
- SENDER ASY. (OIL PRESSURE ENGINE UNIT)#1825252-C1; Oil Pressure Gauge, includes O-ring (F4TZ-9C064-A), 7.3L, BEFORE 1/12/98
- Base Number:9278
- Callout Name:9278
- Base Number:
- 1/4" NPTF Theads, Gas engines
- Base Number:9278
- Callout Name:9278
- Base Number:
- SealAlso serviced in 9J460
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:1807264-C1
- Callout Name:9J460
- Fit Note:
- SENSOR ASY. (ENGINE COOLANT TEMPERATURE)Eng. oil Temp.
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Callout Name:12A648
- Replaced By:9U2Z-12A648-A
- Fit Note:
- Rounded connector with 2 round pins, Ambient temperature sensor for engine control
- Callout Name:12A648
- Replaced By:9U2Z-12A648-A
- Callout Name:
- Rectangular connector with 2 flat pins, Eng. Oil Temp.
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Callout Name:12A648
- Replaced By:3F1Z-12A648-A
- Fit Note:
- SENSOR ASY. (FUEL INJECTOR TIMING)ICP seal kit
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:1807261-C1
- Callout Name:9F838
- Fit Note:
- #1807329-C91
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:9F838
- Callout Name:9F838
- Fit Note:
- Sensor AssyMounted on air cleaner, Plastic sensor
Mounted on air cleaner, Plastic sensor, BEFORE 1-12-98- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:12A697
- Callout Name:12A697
- Fit Note:
- Synchronizer AssyIncludes W302763 o-ring; Use W300001 for mounting bolt
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Callout Name:12K073
- Fit Note:
- TUBE (EXHAUST GAS RECIRCULATING VALVE TO EXHAUST MANIFOLD)Tube-Exhaust Back Pressure Sensor. Uses 9F485 1/4"-18 connector., below engine serial# 544521, BEFORE 5/12/97
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:9D477
- Callout Name:9D477
- Fit Note:
- Tube-exhaust backpress sensor .#1830933-C1. Use with 9F485 fitting, from engine serial# 544521, FROM 5/12/97
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:9D477
- Callout Name:9D477
- Fit Note:
- Wire AssyNavistar #1807315-C91, 7.3L DI
- Base Number:15525
- Callout Name:15525
- Base Number:
- WIRE ASY. (ENGINE CONTROLS, SENSORS, INJECTORS)International I.D. # 1826608C9*. NOTE: With engine equipped with engnie coolant temperature gauge sender only., w/ or w/o California emissions. (Federal and California emissions), BEFORE 1/12/98
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:12B637
- Callout Name:12B637
- Fit Note:
- Navistar I.D. # 1826606C9* NOTE: With engine equipped with both engine coolant temperature gauge sender and coolant temperature warning lamp switch., w/ or w/o California emissions (Both Federal and California emisiions), BEFORE 1/12/98
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:12B637
- Callout Name:12B637
- Fit Note:
- Wire Assy2 per head
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Base Number:9D930
- Callout Name:9D930
- Fit Note:
- Wiring AssyHarness asy.-w/glow plug relay 12B533 & cover 12A345. #1826608-C92, DI Turbo, BEFORE 5/12/97
- Fit Note:8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged
- Callout Name:9A451
- Replaced By:F8UZ-12B637-DA
- Fit Note:
