Cylinder Block & Cylinder Block Plugs for 1998 Ford E-150 Econoline 4.6L V8 4AT E4OD 4.6L V8 4-Speed Automatic Transmission E4OD
Change VehiclePart No.
Part Description
Retail
Price
Price
Your
Price
Price
Qty.
- BLOCK ASY. (CYLINDER)
Cup type; 13.84mm; Front & rear of block.- Fit Note:8 Cyl 4.6L
- Require Quantity:2
- Package Quantity:2
- Callout Name:6010
- Replaced By:BL3Z-6026-A
2- Fit Note:
- BOLT (CRANKSHAFT MAIN BEARING CAP)
Bolt M9x53.5; Side bolts; New bolts required when replacing bearings- Fit Note:8 Cyl 4.6L
- Require Quantity:10
- Package Quantity:10
- Base Number:6345
- Callout Name:6345
- Fit Note:
Bolt M10x94.5; New bolts required when replacing Bearings.- Fit Note:8 Cyl 4.6L
- Require Quantity:9
- Package Quantity:3
- Base Number:6345
- Callout Name:6345
3- Fit Note:
Stud- M8xM10x126 - Do not re-use removed stud when replacing bearings- Fit Note:8 Cyl 4.6L
- Base Number:6345
- Callout Name:6345
- Fit Note:
CoverPlug; Converter inspection hole in block- Fit Note:8 Cyl 4.6L
- Base Number:6C070
- Callout Name:6C070
1- Fit Note:
- DOWEL
CLUTCH TO FLYWHEEL- Fit Note:8 Cyl 4.6L
- Require Quantity:3
- Package Quantity:5
- Base Number:6397
- Callout Name:6397
5 - Fit Note:
Cylinder block rear to Transmission- Fit Note:8 Cyl 4.6L
- Require Quantity:2
- Package Quantity:2
- Base Number:6397
- Callout Name:6397
- Fit Note:
Dowel - Bearing Cap- Fit Note:8 Cyl 4.6L
- Require Quantity:10
- Package Quantity:10
- Base Number:6A346
- Callout Name:6A346
- Fit Note:
Dowel - Pin- Fit Note:8 Cyl 4.6L
- Require Quantity:4
- Package Quantity:4
- Callout Name:6A008
- Replaced By:F8AZ-6A008-AA
4- Fit Note:
- FREEZE PLUG (ENGINE)
Cup type; 11.4mm; Cylinder head front & rear- Location:Front And Rear
- Fit Note:8 Cyl 4.6L
- Callout Name:6026
- Replaced By:F1AZ-6026-E
2 - Location:
Pipe type-3/8-18x.425-cyl. block- Fit Note:8 Cyl 4.6L
- Require Quantity:3
- Package Quantity:2
- Base Number:6026
- Callout Name:6026
2- Fit Note:
3/8 x 18NPT; Cylinder head- Fit Note:8 Cyl 4.6L
- Base Number:6026
- Callout Name:6026
1- Fit Note:
Cup type-1 3/4" cyl. block- Fit Note:8 Cyl 4.6L
- Require Quantity:8
- Package Quantity:2
- Base Number:6026
- Callout Name:6026
2- Fit Note:
Cup type; 38.30mm; Cylinder head front & rear.- Fit Note:8 Cyl 4.6L
- Require Quantity:6
- Package Quantity:2
- Base Number:6026
- Callout Name:6026
2- Fit Note:
- Cup type-11.4mm- cyl. head
- Fit Note:8 Cyl 4.6L
- Require Quantity:4
- Package Quantity:1
- Base Number:6026
- Callout Name:6026
- Fit Note:
- SENSOR ASY. (KNOCK)
Bolt to retain knock sensor to block- Fit Note:8 Cyl 4.6L
- Base Number:W500225-S424
- Callout Name:12A699
- Fit Note:
Screw in type sensor- Fit Note:8 Cyl 4.6L
- Base Number:12A699
- Callout Name:12A699
1- Fit Note:
- TUBE (WATER BY-PASS)
O-ring for the 8555 - 12.42 x 1.8 rubber- Fit Note:8 Cyl 4.6L, 8 Cyl 5.4L, 8 Cyl 5.4L Supercharged
- Base Number:HM1
- Callout Name:8555
1 - Fit Note:
Also serviced in 9A589 asy. 1.85 inches long- Fit Note:8 Cyl 4.6L, 8 Cyl 5.4L, 8 Cyl 5.4L Supercharged
- Base Number:6758
- Callout Name:8555
1- Fit Note:
Pressed in block behind water pump; O-rings are W704593- S100- Fit Note:8 Cyl 4.6L, 8 Cyl 5.4L, 8 Cyl 5.4L Supercharged
- Base Number:8555
- Callout Name:8555
1- Fit Note: