Internal Parts-Manual Control Linkage & Parking Pawl for 2001 Ford E-350 Econoline 7.3L V8 Diesel Turbocharged 4AT 4R100 7.3L V8 Diesel Turbocharged 4-Speed Automatic Transmission 4R100
Change VehiclePart No.
Part Description
Retail
Price
Price
Your
Price
Price
Qty.
- ABUTMENT (PARK PAWL ACTUATING)
(020-030) Screw, pan head - M8-1.25 x 25-attaches (7G101 to 7005), 1C2P-A*,B*,D*- Base Number:HS1
- Callout Name:7G101
5 - Base Number:
Screw1C2P-A*,B*,D*- Require Quantity:5
- Package Quantity:5
- Base Number:7D167
- Callout Name:7D167
5- Require Quantity:
- BUSHING (CASE)
Rear - bushing - with one lubrication groove, 1C2P-A*,B*,D*- Location:Rear
- Base Number:7025
- Callout Name:7025
1- Location:
- CASE ASY.
Ball - EPC blow off - .25" - steel, 1C2P-A*,B*,D*- Base Number:353078-S100
- Callout Name:7005
10 - Base Number:
Screw & washer, hex. head - M12-1.75x110- Callout Name:7005
- Replaced By:-N808235-S439
4- Callout Name:
Without PTO - Service case - may appear different from production case, YC2P-E*,G*;1C2P-A*,B*- Base Number:7005
- Callout Name:7005
- Base Number:
(MM-263-D) Nut, push, 1/4" (7B148 to 7005)- Base Number:373907-S2
- Callout Name:7005
8- Base Number:
Nut, spring - 3/8" - attaches id tag to case, 1C2P-A*,B*,D*- Base Number:372552-S2
- Callout Name:7005
4- Base Number:
Pin, dowel - reverse band anchor - 1/2" x .98"- Require Quantity:2
- Package Quantity:2
- Base Number:388142-S
- Callout Name:7005
2- Require Quantity:
Plug - pipe - 1/8"-27 - (pressure tap ports)- Require Quantity:5
- Package Quantity:4
- Callout Name:7005
- Replaced By:-390685-S430
4- Require Quantity:
(090-010) Plug - pressure tap - 1/8"-27 x .65", 1C2P-A*,B*,D*- Base Number:390685-S
- Callout Name:7005
5- Base Number:
- COVER (TRANSMISSION CONVERTER HOUSING LOWER)
7.3L/4R100- Fit Note:8 Cyl 3.4L, 8 Cyl 4.2L, 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.4L Supercharged, 8 Cyl 5.8L, 8 Cyl 6.0L Diesel Turbocharged, 8 Cyl 6.6L, 8 Cyl 6.9L Diesel, 8 Cyl 7.3L Diesel, 8 Cyl 7.3L Diesel Turbocharged, 8 Cyl 7.5L
- Base Number:7986
- Callout Name:7986
1- Fit Note:
- GASKET AND OIL SEAL KIT (OVERHAUL)
- Note: Kit does not include 7D100 and 7C155 gaskets - must order gaskets separately
- Base Number:7153
- Callout Name:7153
1 - Base Number:
- LEVER ASY. (MANUAL CONTROL VALVE DETENT)
Nut, hex M14-1.5 - attaches 7A115 to 7C493, 1C2P-A*,B*,D*- Base Number:HN1
- Callout Name:7A115
4- Base Number:
Nut - Hex.Nut, hex - M14 x 1.5 - attaches 7A115 to 7A256- Callout Name:7A115
- Replaced By:-N800287-S300
4- Callout Name:
Pawl Assy - ParkingBEFORE 11/15/04- Callout Name:7A441
- Replaced By:6C2Z-7A441-A
1- Callout Name:
Pin - Retaining
Pin - retains 7A256 to 7005, 1C2P-A*,B*,D*- Base Number:7B210
- Callout Name:7B210
1- Base Number:
- PLATE (PARK ROD GUIDE)
(AB-160-E) Bolt, hex head - M8 - 1.25 x 23.8-attaches (7D419 to 7005), 1C2P-A*,B*,D*- Require Quantity:2
- Package Quantity:4
- Base Number:HS1
- Callout Name:7D419
4- Require Quantity:
PlugPlug - rubber - located in bottom of transmission converter housing
Plug - rubber - located in bottom of transmission converter housing, 1C2P-A*,B*,D*- Base Number:7N171
- Callout Name:7N171
1- Base Number:
Pin - Retaining1C2P-A*,B*,D*- Base Number:7D071
- Callout Name:7D071
1- Base Number:
Pin - Retaining1/8" diameter hole in end of shaft- Base Number:7D071
- Callout Name:7D071
1- Base Number:
Spring1C2P-A*,B*,D*- Base Number:7D070
- Callout Name:7D070
1- Base Number:
- SPRING ASY. (MANUAL VALVE DETENT)
(AB-117-DB) Bolt, hex head - M6 - 1.00 x 15.2-attaches (7E332 to 7005), 1C2P-A*,B*,D*- Base Number:HB1
- Callout Name:7E332
4 - Base Number:
#Orange paint, 1C2P-A*,B*,D*- Base Number:7E332
- Callout Name:7E332
1- Base Number:
Tube - Oil Filler1C2P-A*,B*,D*- Base Number:7A160
- Callout Name:7A160
- Base Number:
- VALVE ASY. (TRANSMISSION COOLER BYPASS)
Kit - washers for cooler bypass valve assembly fittings - includes (2) 391932-S100 and (2) 391933-S100 washers, 1C2P-A*,B*,D*- Callout Name:7H322
1 - Callout Name:
- #F75P 7H322-AB - includes cooler case fittings and banjo washers, 1C2P-A*,B*,D*
- Callout Name:7H322
- Replaced By:2C3Z-7H322-AA
1 - Callout Name:
Washer - ThrustThrust bearing - #13, 1C2P-A*,B*,D*- Base Number:7B368
- Callout Name:7B368
- Base Number:
