Ford Distributor Cap

Henry Ford and his coworkers started Ford on June 16, 1903. In the last century, it was used to make a number of successful cars and a lot of good parts. During its development, many well-known parts were made, like the Ford distributor cap. The Ford distributor cap parts transfer energy from the ignition coils to the engine in order to spark the fuel. In older models, the Ford distributor cap parts can be put in the wrong way, and they will still work.

Ford offers reliability and practicality to customers. But there will be several problems after Ford distributor cap parts have been used for years. Replace the distributor cap parts if it is cracked or there are signs of condensation. The removal process for the Ford distributor cap parts is as follows: First, disconnect the negative battery terminal. Next, mark wires with cylinder numbers before removal to avoid a mix-up of cylinders. Then, remove the spark plug wires off the distributor cap, and loosen the retaining screws/nuts on the cap to loosen the cap. Finally, carefully lift the cap off the distributor to avoid further damage to engine components. The brake system, the engine, the chassis, and other Ford parts are all in the huge online catalog. Customers could always get Ford performance products from our website.